Leak detector infrared Fieldpiece DR82

Product information

DR82 refrigerant leak finders help technicians find and locate leaks quickly thanks to the highest possible sensitivity.

Three reasons why you need the DR82

1. Advanced infrared sensor
The DR82EU is equipped with a high-quality infrared sensor with a lifetime of up to 10 years. Moreover, the sensor does not react to oil or moisture and only lets you know when refrigerant is leaking. The DR82EU also registers changes in the refrigerant level.

2. The highest possible sensitivity

With the ability to detect leaks at 1 g/year, the DR82EU exceeds detection standards. The DR82EU works quickly and you can detect and locate leaks in the blink of an eye. And with the option to automatically recalibrate every three seconds or choose the calibration frequency interval manually, you are always sure to use exactly what you need.

3. Easy to view

With a large backlit LCD screen, you can easily view bar graphs, numeric readings and customisable dual alarms. The DR82EU makes it easy for you to detect and read the information on the backlit screen, meaning you can view the information in all conditions.

Specifications

Sensor type: Infrared (IR)
Sensor life: 10 years normal
Sensitivity levels: High, medium, low, turbo (selectable)
Maximum sensitivity: 1g/a, stationary; 3g/a), in motion
Feedback on detection: LED with red tip, LCD bar graph, LCD digits, beeper
Refrigerants: HFC, HCFC, CFC, HFO and mixtures
Response time: typical <1 second
Recovery time: typical <5 seconds
Battery type: 3.7 VDC (nominal) 2600mAh, non-replaceable
Charging time: typical 6 hours with charger provided.
Battery life: 10 hours normal, backlight off
Automatic shutdown: 10 minutes without detection or button press
Operating environment: -20°C to 40°C < 75% RH (non-condensing)
Storage temperature: -20°C to 60°C < 80% RH
Weight: 400g
Water resistance: Designed to IP54

Included in packaging

1x advanced infrared refrigerant leak detector - DR82EU
5x replacement filtered tips - RFT6
1x blown housing